HRS500數控立式硬軌滑臺

HRS500數控立式硬軌滑臺

導軌防護罩、伺服電機可根據需求加裝配置。

Guide shield and servo motor can be configured according to requirements.

特點(Characteristics)

自主研發制造，配合精密滾珠絲桿，做伺服傳動;導軌表面均經過多次熱處理等標準工藝，表面硬度更深，硬度≥HRC55,

Independent research and development and servo drive is made with accurate ball screw; the surface of guide rail isprocessed with standard technology, such as several rounds of thermal process, etc.The surface hardness is higher,hardness ≥ HRC55.

主體精模高韌鑄鐵鑄造，經人工震動時效及自然雙重時效處理;降低應力增加抗變形能力和穩定性。

The housing is cast with accurate die and the cast iron of high toughness and processed by means of manualvibration aging and natural aging effect to reduce the stress and increase the defomation resistance performanceand stability.

滑臺為工字型矩形導軌，其結構具有承載能力大、剛度高、熱變形小、進給穩定性高的特性，從而保證了加工狀態下(負荷下)的實際精度。

The slipway is the l-shaped rectangular slipway with high bearing capacity and rigidity and low thermal deformationand high feeding stability so that the practical accuracy under processing condition(load) can be assured.

導軌面配合工作臺精密磨削加工并采用人工鏟刮、刮花、配研技術調整鑲條和接觸面，最終精密裝配完成

The sipway surface will operate with the work table to perform accurate grinding and cutting, and manual scraping.shoveling, running-in technology which is adjusted to gibs and contact surface are adopted to complete the finalaccurate assembly.

潤滑系統采用內置控油器，保證每個接觸面均勻潤滑，有效提高滑臺使用壽命。

The lubricating system adopts a built-in oil control device to ensure uniform lubrication of each contact surface andeffectively improve the service life of the sliding table.

HRS500數控立式硬軌滑臺技術參數：